ICE-5
Fuel System Icing Inhibitor

Aircraft that lack fuel heating systems are vulnerable to the freezing of small amounts of autonomous water in the fuel, which may block fuel lines, filters and valves. When properly used, ICE-5 prevents water from icing in the fuel system. ICE-5 Fuel System Icing Inhibitor (FSII) is mixed into the fuel at a ratio of 0.10% to 0.15% based on volume. One litre of ICE-5 can treat from 660 litres to 1,000 litres of fuel. Mix thoroughly to avoid separation of the inhibitor and fuel.

  • Fully water-soluble

  • Inhibits bacteria-growth in fuel tanks

Product info
Brand
Aero-Sense
Available in

500ml aerosol
1 litre can
200 litre barrel
1,000 litre IBC

Certification

ASTM-D4171-03 compliant
Chemical properties according to
MIL-DTL-85470 & DEF STAN 68-252
British Joint Service Designation AL-41
NATO Code Number S-1745

Application

ICE-5 is mixed into the fuel at a ratio of 0.10% to 0.15% based on volume. To avoid overdosing, check the ratio of DiEGME in the kerosene before using ICE-5. Mixing is required to avoid separation of the inhibitor and fuel.

General info

Verify that the application conforms to the P.O.H. and the aircraft or engine manufacturer’s instructions. ICE-5 concentrate must not come into direct contact with the aircraft’s painted surfaces or the fuel tank’s coated interior.

ICE-5 IN AEROSOLS

EASY MIXING!

Adding ICE-5 during refuelling? With an aerosol, ICE-5 can be conveniently blended into the fuel nozzle’s kerosene stream. This prevents separation of the inhibitor and fuel. ICE-5 aerosols are the perfect option when pre-mixing isn’t possible or desirable.

LOOKING FOR SMALL QUANTITIES?

Take a look at our online store.